Pallet Conveyor
- Conveyor equipment
- Conveyor equipment
Taikisha's Technology
What is our conveyor systems?
The conveyor system in the painting factory is an automatic transportation system that is involved in the entire process from receiving the car body from the welding factory, passing through the painting process, and handing over the car body to the assembly factory. Taikisha supports various transportation systems, from the hanger / trolley method that has been used in Japan for a long time to the skid method that is mainly used in Europe. In addition, it can be used not only for automobile bodies but also for painting systems for plastic parts.
What is undercoating overhead conveyors?
Overhead conveyor is used in the undercoat process.
Overview
This conveyor is an overhead pallet conveyor applied in the undercoat process. It is a friction type transport and is a tact type (continuous type is also possible). It can also be used in robot processes.
Compared to the conventional hanger type, it is supported by a shorter length than the arm, and the pallet is mounted on the left and right rails, so there is less shaking and stability is higher.
Features
①Both high-speed movement or low-speed continuous movement
High-speed movement is possible due to the friction method, and low-speed continuous movement is also possible.
②High energy efficiency
The friction system can increase energy efficiency by operating only when the hanger is detected.
③Reduction of installation space
The line to return empty pallets is placed above the machine, allowing a smaller installation space
④Reduced noise of operation
Adopting a friction system can reduce the noise of operation.
Installation Illustration
Inside at the working area
Pallet over view
Body Transfer and up/down lifter
Contact
For inquiries or questions regarding this website,
please click on this button.